Botox in below knee amputation for the management of post-operative contracture: a systematic review.

During the 1970s, scientists first used botulinum toxin to treat strabismus. While testing on monkeys, they noticed that the toxin could also reduce wrinkles in the glabella area. This led to its widespread use in both medical and cosmetic fields. The objective of the study was to evaluate the potential use of Botox in managing post-operative contracture after below-knee amputation. We conducted a systematic review In Pubmed, Cochrane Library, Embase, and Google Scholar using the MESH terms Botox, botulinum toxin, post-operative contracture, amputation, and below knee amputation. Our goal was to evaluate the potential use of Botox to manage post-operative contracture in patients who have undergone below-knee amputation. Our findings show evidence in the literature that Botox can effectively manage stump hyperhidrosis, phantom pain, and jumping stump, but no clinical trial has been found that discusses the use of Botox for post-operative contracture. Botox has been used in different ways to manage spasticity. Further studies and clinical trials are needed to support the use of Botox to manage this complication.

[Prosthetic Fitting Concepts after Major Amputation in the Upper Limb - an Overview of Current Possibilities]. / Prothetische Versorgungskonzepte nach Majoramputation der oberen Extremität ­ eine Übersicht gegenwärtiger Möglichkeiten.

BACKGROUND: The upper extremity and particularly the hands are crucial for patients in interacting with their environment, therefore amputations or severe damage with loss of hand function significantly impact their quality of life. In cases where biological reconstruction is not feasible or does not lead to sufficient success, bionic reconstruction plays a key role in patient care. Classical myoelectric prostheses are controlled using two signals derived from surface electrodes in the area of the stump muscles. Prosthesis control, especially in high amputations, is then limited and cumbersome. The surgical technique of Targeted Muscle Reinnervation (TMR) offers an innovative solution: The major arm nerves that have lost their target organs due to amputation are rerouted to muscles in the stump area. This enables the establishment of cognitive control signals that allow significantly improved prosthesis control. PATIENTS/MATERIALS AND METHODS: A selective literature review on TMR and bionic reconstruction was conducted, incorporating relevant articles and discussing them considering the clinical experience of our research group. Additionally, a clinical case is presented. RESULTS: Bionic reconstruction combined with Targeted Muscle Reinnervation enables intuitive prosthetic control with simultaneous movement of various prosthetic degrees of freedom and the treatment of neuroma and phantom limb pain. Long-term success requires a high level of patient compliance and intensive signal training during the prosthetic rehabilitation phase. Despite technological advances, challenges persist, especially in enhancing signal transmission and integrating natural sensory feedback into bionic prostheses. CONCLUSION: TMR surgery represents a significant advancement in the bionic care of amputees. Employing selective nerve transfers for signal multiplication and amplification, opens up possibilities for improving myoelectric prosthesis function and thus enhancing patient care. Advances in the area of external prosthetic components, improvements in the skeletal connection due to osseointegration and more fluid signal transmission using wireless, fully implanted electrode systems will lead to significant progress in bionic reconstruction, both in terms of precision of movement and embodiment.

Challenges and Solutions in Prosthetic Fitting of Digits after Flap Reconstruction.

Surgical reconstruction can restore length and function, but cannot adequately resolve the problem of disfigurement. Prosthetic fitting can play a complementary role in enhancing the aesthetic outcomes post reconstruction. However, complex reconstruction involving flaps coupled with the surgical imperative for limb length preservation can lead to outcomes where the reconstructed stumps are challenging to fit with prosthesis. This article describes how prosthetic fitting was tackled in a case of a triple-digit amputation after reconstruction that presented with finger stumps that were bulky, long and stiff in extension contracture, compounded by the presence of substantive scar tissues. We discuss major prosthesis modifications that were unconventional but necessary to enable fitting, the techniques involved, as well as the aesthetic and functional considerations behind the modifications. The results showed that enhanced aesthetic appearance, together with a marginal improvement in hand function, was achieved post-prosthetically, meeting the patient's and the clinical team's fitting objective. Level of Evidence: Level V (Therapeutic).

Targeted Muscle Reinnervation at the Time of Amputation Decreases Recurrent Symptomatic Neuroma Formation.

BACKGROUND: Targeted muscle reinnervation (TMR) is an effective technique for the prevention and management of phantom limb pain (PLP) and residual limb pain (RLP) among amputees. The purpose of this study was to evaluate symptomatic neuroma recurrence and neuropathic pain outcomes between cohorts undergoing TMR at the time of amputation (ie, acute) versus TMR following symptomatic neuroma formation (ie, delayed). METHODS: A cross-sectional, retrospective chart review was conducted using patients undergoing TMR between 2015 and 2020. Symptomatic neuroma recurrence and surgical complications were collected. A subanalysis was conducted for patients who completed Patient-Reported Outcome Measurement Information System (PROMIS) pain intensity, interference, and behavior scales and an 11-point numeric rating scale (NRS) form. RESULTS: A total of 105 limbs from 103 patients were identified, with 73 acute TMR limbs and 32 delayed TMR limbs. Nineteen percent of the delayed TMR group had symptomatic neuromas recur in the distribution of original TMR compared with 1% of the acute TMR group ( P < 0.05). Pain surveys were completed at final follow-up by 85% of patients in the acute TMR group and 69% of patients in the delayed TMR group. Of this subanalysis, acute TMR patients reported significantly lower PLP PROMIS pain interference ( P < 0.05), RLP PROMIS pain intensity ( P < 0.05), and RLP PROMIS pain interference ( P < 0.05) scores in comparison to the delayed group. CONCLUSIONS: Patients who underwent acute TMR reported improved pain scores and a decreased rate of neuroma formation compared with TMR performed in a delayed fashion. These results highlight the promising role of TMR in the prevention of neuropathic pain and neuroma formation at the time of amputation. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Nerve Capping Techniques for Neuroma Management: A Comprehensive Literature Review.

BACKGROUND/AIM OF THE STUDY: Nerve capping is a method of neuroma treatment or prevention that consists of the transplantation of a proximal nerve stump into an autograft or other material cap, after surgical removal of the neuroma or transection of the nerve. The aim was to reduce neuroma formation and symptoms by preventing neuronal adhesions and scar tissue. In this narrative literature review, we summarize the studies that have investigated the effectiveness of nerve capping for neuroma management to provide clarity and update the clinician's knowledge on the topic. METHODS: A systematic electronic search following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria was performed in the PubMed database combining "neuroma," "nerve," "capping," "conduit," "treatment," "management," "wrap," "tube," and "surgery" as search terms. English-language clinical studies on humans and animals that described nerve capping as a treatment/prevention technique for neuromas were then selected based on a full-text article review. The data from the included studies were compiled based on the technique and material used for nerve capping, and technique and outcomes were reviewed. RESULTS: We found 10 applicable human studies from our literature search. Several capping materials were described: epineurium, nerve, muscle, collagen nerve conduit, Neurocap (synthetic copolymer of lactide and caprolactone, which is biocompatible and resorbable), silicone rubber, and collagen. Overall, 146 patients were treated in the clinical studies. After surgery, many patients were completely pain-free or had considerable improvement in pain scores, whereas some patients did not have improvement or were not satisfied after the procedure. Nerve capping was used in 18 preclinical animal studies, using a variety of capping materials including autologous tissues, silicone, and synthetic nanofibers. Preclinical studies demonstrated successful reduction in rates of neuroma formation. CONCLUSIONS: Nerve capping has undergone major advancements since its beginnings and is now a useful option for the treatment or prevention of neuromas. As knowledge of peripheral nerve injuries and neuroma prevention grows, the criterion standard neuroprotective material for enhancement of nerve regeneration can be identified and applied to produce reliable surgical outcomes.

Beta Changes Induced by Acute Hand Loss Model during NMES.

Neuromuscular electrical stimulation (NMES) has been demonstrated to effectively modulate cortical activities by evoking muscle contraction in upper limb and generating joint movements, which showed an excellent performance in motor rehabilitation. However, due to hand loss and cortical function reorganization induced by hand amputation, how neural activities in sensorimotor cortex response to NMES-evoked muscle contraction in the end of an amputation stump is not clear. In this paper, Ischemic nerve block (INB) technique was used to build an acute hand loss model, and 64-channel EEG signals were recorded from 11 healthy subjects to perform a 2×2 factorial design protocol, with the INB state and the current intensity as factors. The changes of NMES-evoked sensorimotor cortical activities were quantified by computing Beta-band event-related desynchronization (Beta ERD) patterns and the time-varying functional connectivity using adaptive directed transfer function (ADTF) before and during INB. The acute hand "loss" resulted in ipsilateral dominance of Beta ERD induced by NMES with two current intensities in the topographic maps, that is, ipsilateral Beta ERD was significantly higher than that the contralateral one (p<0.05). However, before INB, Beta ERD in the contralateral sensorimotor cortex induced by NMES above motor threshold was significantly higher than that in the ipsilateral area (p< 0.01). Meanwhile, whatever before or during INB, clustering coefficients of the ADTF network in sensorimotor cortex showed temporal dynamics during two NMES tasks. During INB, NMES above motor threshold-evoked lower clustering coefficients of the time-varying network in sensorimotor cortex than that before INB (p<0.05). The present results suggest that the loss of the hand proprioception will degrade cortical activities in the contralateral area, and increase cortical activities in the ipsilateral area compensatively responding to NMES. This finding may be particularly important to improve the reconstruction of the proprioception function of hand prosthesis.

Reinervación muscular dirigida diferida en el manejo del dolor neuropático tras amputación de extremidad inferior / Delayed targeted muscle reinnervation in the management of neuropathic pain after lower limb amputation

Introducción y objetivo: El dolor neuropático es una de las complicaciones más comunes en la cirugía de amputación de extremidad inferior. En este contexto surge la Reinervación Muscular Dirigida (TMR) como técnica con resultados prometedores en el tratamiento del dolor neuropático tras amputación. En este artículo presentamos la técnica quirúrgica y nuestra experiencia clínica. Material y método: Entre enero de 2021 y diciembre de 2022 registramos los pacientes intervenidos para TMR diferida de extremidad inferior en el Servicio de Cirugía Plástica del Hospital Universitario Miguel Servet (Zaragoza, España) evaluando su capacidad de portar prótesis a los 6 meses de la intervención. Asimismo, exponemos la técnica quirúrgica empleada. Resultados: Intervenimos 9 pacientes, 7 amputaciones infracondíleas y 2 supracondíleas. A los 6 meses, 7 eran capaces de deambular con prótesis y en 2 persistía dolor de componente mixto que impedía la protetización. Ambos pacientes habían sido amputados por causas vasculares. Conclusiones: En nuestra serie clínica obtuvimos resultados prometedores que permitieron la protetización en una gran proporción de casos, si bien la selección de pacientes es un punto crucial en la aplicación de esta técnica.(AU)

Background and objective: Neuropathic pain is one of the most common complications in lower extremity amputation surgery. In this context, Targeted Muscle Reinnervation (TMR) emerges as a technique with promising results in the treatment of neuropathic pain after amputation and phantom limb.In this article we describe the surgical technique and our clinical experience. Methods: Between January 2021 and December 2022, we registered the patients operated on for delayed TMR of the lower extremity in the Plastic Surgery Service of the Miguel Servet University Hospital (Zaragoza, Spain) evaluating their ability to wear prostheses 6 months after the intervention. Likewise, we expose the surgical technique used. Results: A total of 9 patients were operated, being 7 infracondylar and 2 supracondylar amputations. Six months after surgery, 7 patients could walk with the prosthesis, while the other 2 ones still experienced pain that prevented fitting the prosthesis. Both patients had been amputated for vascular causes. Conclusions: In our clinical series, we obtained promising results which allow ambulation in a large proportion of patients although we consider that patient selection is a crucial point in the application of this technique.(AU)

Adjustable prosthetic sockets: a systematic review of industrial and research design characteristics and their justifications.

BACKGROUND: The prosthetic socket is a key component that influences prosthesis satisfaction, with a poorly fitting prosthetic socket linked to prosthesis abandonment and reduced community participation. This paper reviews adjustable socket designs, as they have the potential to improve prosthetic fit and comfort through accommodating residual limb volume fluctuations and alleviating undue socket pressure. METHODS: Systematic literature and patent searches were conducted across multiple databases to identify articles and patents that discussed adjustable prosthetic sockets. The patents were used to find companies, organisations, and institutions who currently sell adjustable sockets or who are developing devices. RESULTS: 50 literature articles and 63 patents were identified for inclusion, representing 35 different designs used in literature and 16 commercially available products. Adjustable sockets are becoming more prevalent with 73% of publications (literature, patents, and news) occurring within the last ten years. Two key design characteristics were identified: principle of adjustability (inflatable bladders, moveable panels, circumferential adjustment, variable length), and surface form (conformable, rigid multi-DOF, and rigid single DOF). Inflatable bladders contributed to 40% of literature used designs with only one identified commercially available design (n = 16) using this approach. Whereas circumferential adjustment designs covered 75% of identified industry designs compared to only 36% of literature devices. Clinical studies were generally small in size and only 17.6% of them assessed a commercially available socket. DISCUSSION: There are clear differences in the design focus taken by industry and researchers, with justification for choice of design and range of adjustment often being unclear. Whilst comfort is often reported as improved with an adjustable socket, the rationale behind this is not often discussed, and small study sizes reduce the outcome viability. Many adjustable sockets lack appropriate safety features to limit over or under tightening, which may present a risk of tissue damage or provide inadequate coupling, affecting function and satisfaction. Furthermore, the relationship between design and comfort or function are rarely investigated and remain a significant gap in the literature. Finally, this review highlights the need for improved collaboration between academia and industry, with a strong disconnect observed between commercial devices and published research studies.

Moisture mitigation using a vented liner and a vented socket system for individuals with transfemoral amputation.

Sweating and heat buildup at the skin-liner interface is a major challenge for persons with limb loss. Liners made of heat-non-conducting materials may cause sweating of the residual limb and may result in liners slipping off the skin surface especially on a warm day or during high activity, causing skin breakdown and affecting limb health. To address this, we evaluated the efficacy of the vented liner-socket system (VS, Össur) compared to Seal-In silicone liner and non-vented socket (nVS, Össur) in reducing relative humidity (RH) during increased sweat. Nine individuals with limb loss using nVS were randomized to VS or nVS and asked for activity in a 20-min treadmill walk. RH was significantly attenuated (p = 0.0002) and perceived sweating, as reported by prosthesis users, improved (p = 0.028) with VS, patient-reported comprehensive lower limb amputee socket survey (CLASS) outcomes to determine the suspension, stability, and comfort were not significantly different between VS and nVS. There are limited rigorous scientific studies that clearly provide evidence-based guidelines to the prosthetist in the selection of liners from numerous available options. The present study is innovative in clearly establishing objective measures for assessing humidity and temperatures at the skin-liner interface while performing activity. As shown by the measured data and perceived sweat scores provided by the subjects based on their daily experience, this study provided clear evidence establishing relative humidity at the skin-liner interface is reduced with the use of a vented liner-socket system when compared to a similar non-vented system.

Mapping lines of non-extension in persons with lower limb amputation to aid comfort-driven prosthetic socket design.

OBJECTIVE: This study aimed to develop a new technique to map the strain field for persons with lower-limb amputations to use for the design of comfortable prostheses. METHODS: Using a DSLR camera with stenciled 2D markers, we demonstrated a technique to measure skin strain around the residual limb of persons with lower limb amputations. We used open-source software programs to reconstruct a series of cloud points derived from the pictures of the marked residual limb into 3D models, then calculated the minimum, maximum, and non-extension lines from directional strain fields. RESULTS: A DSLR camera was successful in capturing 2D markers. The maximum mean principal strain was 68% ± 14%, observed around the patella. The minimum compressive mean principal strain of -31% ± 4% was observed posteriorly in the popliteal region of the knee. Although lines of non-extension (LoNE) appear separate in different participants, they are anatomically located in regions that could be generalized for the design of prostheses. CONCLUSIONS: Marker locations extracted from the video of different poses can be compared to calculate strains from which the position of LoNE can be generated. The use of LoNE could be valuable in reducing discomfort at the socket interface and informing future socket design.

Advances in the measurement of prosthetic socket interface mechanics: a review of technology, techniques, and a 20-year update.

INTRODUCTION: A key determinant of prosthesis use is the quality of fit of the prosthetic socket. The socket surrounds the residual limb and applies the appropriate force distribution to the soft tissues to maintain suspension, support, and stabilization as well as translate limb movement to prosthesis movement. The challenge in socket fabrication lays in achieving geometry that provides the appropriate force distribution at physiologically appropriate locations; a task dependent on the understanding of interface tissue-mechanics. AREAS COVERED: In the last 20 years substantial advancements in sensor innovation and computational power have allowed researchers to quantify the socket-residual limb interface; this paper reviews prominent measurement and sensing techniques described in literature over this time frame. Advantages and short comings of each technique are discussed with a focus on translation to clinical environments. EXPERT OPINION: Prosthetic sockets directly influence comfort, device use, user satisfaction, and tissue health. Advancements in instrumentation technology have unlocked the possibility of sophisticated measurement systems providing quantitative data that may work in tandem with a clinician's heuristic expertise during socket fabrication. If validated, many of the emerging sensing technologies could be implemented into a clinical setting to better characterize how patients interact with their device and help inform prosthesis fabrication and assessment techniques.

Approach for Non-Intrusive Detection of the Fit of Orthopaedic Devices Based on Vibrational Data.

The soft tissues of residual limb amputees are subject to large volume fluctuations over the course of a day. Volume fluctuations in residual limbs can lead to local pressure marks, causing discomfort, pain and rejection of prostheses. Existing methods for measuring interface stress encounter several limitations. A major problem is that the measurement instrumentation is applied in the sensitive interface between the prosthesis and residual limb. This paper presents the principle investigation of a non-intrusive technique to evaluate the fit of orthopaedic prosthesis sockets in transfemoral amputees based on experimentally obtained vibrational data. The proposed approach is based on changes in the dynamical behaviour detectable at the outer surface of prostheses; thus, the described interface is not affected. Based on the experimental investigations shown and the derived results, it can be concluded that structural dynamic measurements are a promising non-intrusive technique to evaluate the fit of orthopaedic prosthesis sockets in transfemoral amputee patients. The obtained resonance frequency changes of 2% are a good indicator of successful applicabilityas these changes can be detected without the need for complex measurement devices.

A Workflow for Studying the Stump-Socket Interface in Persons with Transtibial Amputation through 3D Thermographic Mapping.

The design and fitting of prosthetic sockets can significantly affect the acceptance of an artificial limb by persons with lower limb amputations. Clinical fitting is typically an iterative process, which requires patients' feedback and professional assessment. When feedback is unreliable due to the patient's physical or psychological conditions, quantitative measures can support decision-making. Specifically, monitoring the skin temperature of the residual limb can provide valuable information regarding unwanted mechanical stresses and reduced vascularization, which can lead to inflammation, skin sores and ulcerations. Multiple 2D images to examine a real-life 3D limb can be cumbersome and might only offer a partial assessment of critical areas. To overcome these issues, we developed a workflow for integrating thermographic information on the 3D scan of a residual limb, with intrinsic reconstruction quality measures. Specifically, workflow allows us to calculate a 3D thermal map of the skin of the stump at rest and after walking, and summarize this information with a single 3D differential map. The workflow was tested on a person with transtibial amputation, with a reconstruction accuracy lower than 3 mm, which is adequate for socket adaptation. We expect the workflow to improve socket acceptance and patients' quality of life.

Movimientos involuntarios del muñón tras una amputación transtibial: síndrome del muñón saltarín / Involuntary movements of the stump after transtibial amputation: Jumping stump syndrome

Mujer de 45 años, con antecedente de cirugía de hallux valgus de evolución tórpida, derivando en amputación transtibial. A los 6 meses poscirugía comenzó con movimientos involuntarios del muñón tipo mioclonías desencadenados con el roce o extensión de la cadera, agravándose el dolor previo de muñón y de miembro fantasma. Durante el siguiente año, coincidiendo con el cambio de prótesis, empeoró la clínica progresivamente limitando la marcha. El abordaje terapéutico del dolor y de las mioclonías fue inicialmente farmacológico, sin respuesta. Ante la sospecha clínica y ecográfica de neuroma en el nervio ciático poplíteo externo, se infiltró el mismo con corticoide y anestésico y los gastrocnemios con toxina botulínica tipo A, sin éxito. Finalmente, las mioclonías desaparecieron y el dolor disminuyó tras el remodelado quirúrgico del muñón y la resección del neuroma. Este cuadro clínico es conocido como síndrome del muñón saltarín, y es una complicación rara que debe tenerse en cuenta tras una amputación.(AU)

45-year-old woman with history of hallux valgus surgery and torpid evolution, which led to transtibial amputation. Six months after surgery, she began to experience involuntary movements of the stump such as myoclonus, that were triggered by touch or hip extension, associating worsening of the previous stump and phantom limb pain. During the following year, concurring with change of prosthesis, symptoms progressively worsened, which limited walking. The therapeutic approach to pain and myoclonus was initially pharmacological, without response. Given the clinical and ultrasound suspicion of neuroma in the external popliteal sciatic nerve, it was infiltrated with corticosteroid and anesthetic, and the gastrocnemius with botulinum toxin type A, without success. Finally, the myoclonus disappeared, and the pain decreased after surgical remodeling of the stump and resection of the neuroma. This clinical picture is known as jumping stump syndrome and is a rare complication that must be considered after amputation.(AU)

Short partial doffs of release/relock sockets may effectively stabilize limb fluid volume in prosthesis users with transtibial amputation.

BACKGROUND: A challenge often faced by people with lower extremity amputation is management of prosthetic socket fit due to changes in fluid volume within their residual limb. Prior research suggests that intermittently doffing the prosthetic socket may help stabilize daily residual limb fluid volume. METHODS: To assess the effects of partial doff duration on residual limb fluid volume retention, participants with transtibial amputation were tested by walking on a treadmill in a controlled, laboratory setting under three conditions. An automated system to release the locking pin and enlarge the socket was used to produce the partial doffing. Percent limb fluid volume changes after partial doffing for 4 min (Short Rest) and for 10 min (Long Rest) were compared with no partial doffing (No Release). Limb fluid volume was monitored using bioimpedance analysis. FINDINGS: Mean percent fluid volume changes in the posterior region were  -1.2% for No Release, 2.7% for Short Rest, and 1.0% for Long Rest. Short and Long Rests had larger increases than No Release (P = 0.005 and 0.03, respectively); Short and Long Rests were not statistically different (P = 0.10). Eight of the thirteen participants experienced a higher percent fluid volume gain for both release protocols while four experienced a higher percent fluid volume gain for only one release protocol. INTERPRETATION: A partial doff duration as short as 4 min may be an effective strategy to stabilize limb fluid volume in prosthesis users with transtibial amputation. Trials in at-home settings should be pursued.

Validation of a Custom Interface Pressure Measurement System to Improve Fitting of Transtibial Prosthetic Check Sockets.

Achievement of fit between the residual limb and prosthetic socket during socket manufacture is a priority for clinicians and is essential for safety. Clinicians have recognised the potential benefits of having a sensor system that can provide objective socket-limb interface pressure measurements during socket fitting, but the cost of existing systems makes current technology prohibitive. This study will report on the characterisation, validation and preliminary clinical implementation of a low cost, portable, wireless sensor system designed for use during socket manufacture. Characterisation and benchtop testing demonstrated acceptable accuracy, behaviour at variable temperature, and dynamic response for use in prosthetic socket applications. Our sensor system was validated with simultaneous measurement by a commercial sensor system in the sockets of three transtibial prosthesis users during a fitting session in the clinic. There were no statistically significant differences between the sensor system and the commercial sensor for a variety of functional activities. The sensor system was found to be valid in this clinical context. Future work should explore how pressure data relates to ratings of fit and comfort, and how objective pressure data might be used to assist in clinical decision making.

[The surgical treatment of peripheral neuromas]. / De chirurgische behandeling van perifere neuromen.

Peripheral neuromas are a prevalent problem following nerve injury or certain surgical interventions like limb amputation. It is important to consider a peripheral neuroma when a patient experiences pain in the innervation area of a peripheral sensory or mixed nerve (branch), especially following trauma or amputation. Adequate recognition of a painful neuroma is crucial to treat patients satisfactorily for their invalidating and chronic symptoms. We want to emphasize that surgical intervention can be an effective and permanent treatment for symptomatic neuromas. The standard surgical treatment is neuroma excision and burying of the nerve stump in adjacent muscle. However, there is a shift towards new and active techniques like Targeted Muscle Reinnervation, of which future comparative research will have to demonstrate whether it is more effective in treating peripheral neuroma pain than conventional surgery.

[The surgical treatment of peripheral neuromas]. / De chirurgische behandeling van perifere neuromen.

Peripheral neuromas are a prevalent problem following nerve injury or certain surgical interventions like limb amputation. It is important to consider a peripheral neuroma when a patient experiences pain in the innervation area of a peripheral sensory or mixed nerve (branch), especially following trauma or amputation. Adequate recognition of a painful neuroma is crucial to treat patients satisfactorily for their invalidating and chronic symptoms. We want to emphasize that surgical intervention can be an effective and permanent treatment for symptomatic neuromas. The standard surgical treatment is neuroma excision and burying of the nerve stump in adjacent muscle. However, there is a shift towards new and active techniques like Targeted Muscle Reinnervation, of which future comparative research will have to demonstrate whether it is more effective in treating peripheral neuroma pain than conventional surgery.